Fluid Bed Dryer

Technical Specifications

Model SAI – 10 SAI – 30 SAI – 60 SAI – 120 SAI – 150 SAI – 200 SAI – 250
Capacity in Kgs. 5 to 10 Kg. 30Kg. 60 Kg. 120 Kg. 150 Kg. 200 Kg. 250 Kg.
Total volume of prod
container in Ltrs.
working Vol. 70%
32 Ltrs.
Gross
107 Ltrs.
Gross
132 Ltrs.
Gross
344 Ltrs.
Gross
433 Ltrs.
Gross
600 Ltrs.
Gross
777 Ltrs.
Gross
Blower Motro Rating
in HP
10HP 15HP 20HP 15HP 30HP 30HP 50HP
Steam Consumption
Kgs. / Hr.
97 130 162 194 194 194 194
Heating Capacity
Kcl. / Hr.
49400 65850 82320 98785 110000 120000 120000
New Weight in Kgs.
(Approx)
800 2000 2500 2700 2800 3000 3000
Utilities Required
Minimum Steam
pressure Kgs./cm2
4 Kgs./cm2 4 Kgs./cm2 4 Kgs./cm2 4 Kgs./cm2 4 Kgs./cm2 4 Kgs./cm2 4 Kgs./cm2
Compressed Air
pressure Kgs./cm2
4 Kgs./cm2 4 Kgs./cm2 4 Kgs./cm2 4 Kgs./cm2 4 Kgs./cm2 4 Kgs./cm2 4 Kgs./cm2
C.F.M. 1500 2000 2500 3000 5100 6000 6000
Dimension (mm) A (L) 3500 3600 4100 4500 4700 5200 5200
Approx B (H) 2000 2600 2800 3600 4000 4300 4300
Maximum C (W) 1000 1150 1200 15050 1660 1900 1900
D (FH) 860 1325 1325 1490 1490 2120 2120
Shell ID 425 650 700 1000 1000 1340 1340

Technical Video

Tapasya FBDs are the state of the art drying units comparable to any internationally made FBDs, with all the features available. Our FBDs are built with a working pressure of 3.0 Bar at 800c.

The in-house innovation team has been able to enhance the drying capabilities of our FBDs by 18 – 20% thus resulting in lesser drying time, giving a better shelf life to the product. The air handling unit has been designed keeping in mind, tool less construction for ease in cleaning / replacing the filter assembly. The finger bag assembly is with quick release clamps for easy removal and fixing of the finger bag. The machine has been designed ergonomically resulting in ease of operation.

Primary Features

Tri level filtration using 20 micron for Pre Air filtration 5 micron for Secondary Air filtration.

0.3 micron for Final Air filtration through HEPA.

Air Dehumidification on special demand.

Inlet / Outlet dampers have proportional control valve.

Proportional control temp controller.

Inlet / Exhaust Location: Several alternatives to suit customer requirements.

Wash in place.

Control By PLC monitor with printer as optional.

Specially designed explosion flaps

2 Pneumatic Cylinders 1 for the Bag Up and Down movement and the other for Impact Bag Shaking.

Specially designed Broken Bag Detector.

Double skinned SS 304 AHU with a built in Face and By Pass damper for ± 1° Temperature control.

Specially designed anti static anti sparking blower.

High static high efficiency blower installed.

Ergonomically mounted observation windows provided for viewing drying operation.